PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 466-11
466-11 ✓ Verified by PartsTable
Lindy · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

- 2 x LC Fibre Optic Male to 2 x SC Fibre Optic Male<br>- Compatible with all standard fibre optic equipment and connectors<br>- Full duplex 62.5/125µm type fibre<br>- Zip twin, LS0H, Multimode cable<br>- Ceramic connectors ensure low signal loss and high reliability<br>- Total immunity to electrical and electromagnetic interference (EMI)<br>- Insertion Loss: <0.3dB<br>- RoHS Compliant This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1006, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
466-11
NSN: 5306-00-151-1006
FSC: 5306
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.125 INCHES NOMINAL IN
flute_quantity2
overall_length3.250 INCHES NOMINAL IN
shank_diameter0.172 INCHES NOMINAL IN
special_featuresCOBALT/HSS, JOBBERS LG; FRACTIONAL SIZE 11/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.1719 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5306-00-151-1006
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 466-11 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.891 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
•
THREAD SERIES DESIGNATOR: UNF
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM FIRST HOLE IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.891 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
THREAD CLASS3A A
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM FIRST HOLE IN
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
43859Upgraded Successor
successor cross-reference
successor
3537.MOD ITEM 27Upgraded Successor
successor cross-reference
successor
44502Upgraded Successor
successor cross-reference
successor
46611Interchangeable
interchangeable cross-reference
interchangeable
5133PL1020422Interchangeable
interchangeable cross-reference
interchangeable
AN4-17Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 466-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 466-11?
466-11 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by Lindy.
What parts can replace 466-11?
There are 7 known substitutes for 466-11: 43859, 3537.MOD ITEM 27, 44502 and 4 more. Substitute compatibility should be verified for your specific system.
Is 466-11 still available?
466-11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 466-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026