PartsTable
Technical Data Sheet
Download PDF

4635730 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4635730: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: PLASTIC LENS, head_style: PAN NO. 2, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.375 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-661-7515, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4635730
NSN: 5305-01-661-7515
NIINs: 016617515, 016786931
FSC: 5305 — Screws
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialPLASTIC LENS
head_stylePAN NO. 2
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.375 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.450 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresSCREW,4-40 X 3/8 TORX,410 SS,BLK OXIDE
style_designatorCONICAL
thread_directionRIGHT-HAND
internal_drive_styleTORX
NSN5305-01-661-7515
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4635730 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: OXIDE ZINC
•
FASTENER LENGTH: 0.450 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTOXIDE ZINC
FASTENER LENGTH0.450 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
SPECIAL FEATURESSCREW,4-40 X 3/8 TORX,410 SS,BLK OXIDE
INTERNAL DRIVE STYLETORX
SUBSTITUTES & CROSS-REFERENCES 1
29KP701Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4635730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4635730?
4635730 is a SCREW,MACHINE.
What parts can replace 4635730?
There is 1 known substitute for 4635730: 29KP701. Substitute compatibility should be verified for your specific system.
What is the NSN for 4635730?
4635730 is cataloged in the U.S. Government catalog under NSN 5305-01-661-7515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4635730

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.