PartsTable
Technical Data Sheet
Download PDF

46302-465-00-3 — FASTENER,PAWL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

46302-465-00-3: FASTENER,PAWL.

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include length: 1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN, diameter: 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 7075 OVERALL, pawl_type: STRAIGHT, pawl_swing_angle: 135.0 DEGREES NOMINAL, special_features: HOLE QUANTITY:4. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-946-2889, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46302-465-00-3
NSN: 5340-00-946-2889
FSC: 5340 — Hardware, Commercial
CAGE: KC1M9 — BAE SYSTEMS MARITIME SERVICES LIMITED (GBR)
SPECIFICATIONS
length1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
diameter0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
materialALUMINUM ALLOY 7075 OVERALL
pawl_typeSTRAIGHT
pawl_swing_angle135.0 DEGREES NOMINAL
special_featuresHOLE QUANTITY:4
surface_treatmentANODIZE OVERALL
operational_directionRIGHT-HAND
pawl_actuation_methodKNOB
mounting_hole_diameter0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
pawl_length_from_actuating_shaft_center_to_pawl_end0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
NSN5340-00-946-2889
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46302-465-00-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
LENGTH: 1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
•
PAWL ACTUATION METHOD: KNOB
•
MOUNTING HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
DIAMETER: 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
•
PAWL TYPE: STRAIGHT
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONRIGHT-HAND
LENGTH1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
PAWL ACTUATION METHODKNOB
MOUNTING HOLE DIAMETER0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
DIAMETER0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
PAWL TYPESTRAIGHT
SPECIAL FEATURESHOLE QUANTITY:4
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 7075 OVERALL
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 7
B38305Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C 3747 741Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
99050602Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10670761Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6118-06-007Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
128-0112-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 46302-465-00-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46302-465-00-3?
46302-465-00-3 is a FASTENER,PAWL.
What parts can replace 46302-465-00-3?
There are 7 known substitutes for 46302-465-00-3: B38305, C 3747 741, 99050602 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 46302-465-00-3?
46302-465-00-3 is cataloged in the U.S. Government catalog under NSN 5340-00-946-2889. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46302-465-00-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.