PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4629-2
4629-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAP,FILLER OPENING is a the manufacturer industrial component. Key specifications include end_item_identification: GAUGE GROUP, part_name_assigned_by_controlling_agency: FUEL GAGE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8439, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4629-2
NSN: 5330-00-154-8439
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
end_item_identificationGAUGE GROUP
part_name_assigned_by_controlling_agencyFUEL GAGE
NSN5330-00-154-8439
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4629-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 6.007 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 4.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER6.007 INCHES NOMINAL IN
CASE STYLESQUARE
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER4.625 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
SEAL WIDTH0.625 INCHES NOMINAL IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
600420Interchangeable
interchangeable cross-reference
interchangeable
M01092-2Interchangeable
interchangeable cross-reference
interchangeable
AY20153BInterchangeable
interchangeable cross-reference
interchangeable
103778-01Interchangeable
interchangeable cross-reference
interchangeable
GB14C4Interchangeable
interchangeable cross-reference
interchangeable
GB14A4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4629-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4629-2?
4629-2 is a CAP,FILLER OPENING.
What parts can replace 4629-2?
There are 21 known substitutes for 4629-2: 600420, M01092-2, AY20153B and 18 more. Substitute compatibility should be verified for your specific system.
Is 4629-2 still available?
4629-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4629-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026