Name: RESISTOR,FIXED,WIRE WOUND,INDUCT
Brand: Unknown
SKU: 4614-1

4614-1 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter

Verify connector type on BOTH ends — many SAS cables are asymmetric

PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include overall_width: 1.250 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 2.400 INCHES NOMINAL IN, special_features: CAPACITOR 1,DIODE 2,PRINTED WIRING BOARD 1,RESISTOR 4, end_item_identification: CALIBRATOR MODEL II, part_name_assigned_by_controlling_agency: USAGE DESIGN: CIRCUIT BOARD ASSEMBLY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-088-0511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 4614-1

NSN: 5998-01-088-0511
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 99866 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE -OLATHE HUMS DIV (USA)

SPECIFICATIONS

overall_width	1.250 INCHES NOMINAL IN
overall_height	0.750 INCHES NOMINAL IN
overall_length	2.400 INCHES NOMINAL IN
special_features	CAPACITOR 1,DIODE 2,PRINTED WIRING BOARD 1,RESISTOR 4
end_item_identification	CALIBRATOR MODEL II
part_name_assigned_by_controlling_agency	USAGE DESIGN: CIRCUIT BOARD ASSEMBLY
NSN	5998-01-088-0511

COMPONENT DIAGRAM

TECHNICAL CHARACTERISTICS (FLIS)

PART NAME ASSIGNED BY CONTROLLING AGENCY	USAGE DESIGN: CIRCUIT BOARD ASSEMBLY
END ITEM IDENTIFICATION	CALIBRATOR MODEL II
OVERALL WIDTH	1.250 INCHES NOMINAL IN
OVERALL HEIGHT	0.750 INCHES NOMINAL IN
OVERALL LENGTH	2.400 INCHES NOMINAL IN
SPECIAL FEATURES	CAPACITOR 1,DIODE 2,PRINTED WIRING BOARD 1,RESISTOR 4
PART NAME ASSIGNED BY CONTROLLING AGENCY	USAGE DESIGN: CIRCUIT BOARD ASSEMBLY
END ITEM IDENTIFICATION	CALIBRATOR MODEL II
OVERALL WIDTH	1.250 INCHES NOMINAL IN
OVERALL HEIGHT	0.750 INCHES NOMINAL IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 16

MIL-W-16878/4EAWG24VIOLETUpgraded Successor

successor cross-reference

successor

439-4817-000Upgraded Successor

successor cross-reference

successor

HP3-EXBEB7Upgraded Successor

successor cross-reference

successor

950Upgraded Successor

successor cross-reference

successor

4614AUpgraded Successor

successor cross-reference

successor

4614Upgraded Successor

successor cross-reference

successor

LIFECYCLE

StatusACTIVE

AvailabilityOEM and secondary market

RoHS CompliantEAR99ESD SensitiveNot HAZMAT

Ready to buy 4614-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4614-1?

4614-1 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 4614-1?

There are 16 known substitutes for 4614-1: MIL-W-16878/4EAWG24VIOLET, 439-4817-000, HP3-EXBEB7 and 13 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 4614-1?

4614-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-088-0511. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

Comments (0)

No comments yet. Be the first to share what you know.

Request a Quote — 4614-1