PartsTable
Technical Data Sheet
Download PDF

461-092-053 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

461-092-053: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.160 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN, length: 0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, material: STEEL COMP 1075 OVERALL, overall_height: 0.440 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, loop_opening_width: 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-244-1606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
461-092-053
NSN: 5340-01-244-1606
FSC: 5340 — Hardware, Commercial
CAGE: 07421 — L3HARRIS INTERSTATE ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
width1.160 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
length0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
materialSTEEL COMP 1075 OVERALL
overall_height0.440 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
loop_opening_width0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
material_thickness0.020 INCHES NOMINAL IN
distance_from_base_to_lip0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-244-1606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 461-092-053 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
DISTANCE FROM BASE TO LIP: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
LOOP OPENING WIDTH: 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.440 INCHES MAXIMUM IN
LENGTH0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
DISTANCE FROM BASE TO LIP0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
LOOP OPENING WIDTH0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.160 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1075 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
461-092-055Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
B100M0100Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 461-092-053?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 461-092-053?
461-092-053 is a CLIP,SPRING TENSION.
What parts can replace 461-092-053?
There are 2 known substitutes for 461-092-053: 461-092-055, B100M0100. Substitute compatibility should be verified for your specific system.
What is the NSN for 461-092-053?
461-092-053 is cataloged in the U.S. Government catalog under NSN 5340-01-244-1606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 461-092-053

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.