PartsTable
Technical Data Sheet
Download PDF

46000018-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

46000018-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.062 INCHES NOMINAL IN, aperture_width: 1.245 INCHES NOMINAL IN, overall_length: 6.438 INCHES NOMINAL IN, aperture_length: 5.890 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-235-6294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46000018-1
NSN: 5330-00-235-6294
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.062 INCHES NOMINAL IN
aperture_width1.245 INCHES NOMINAL IN
overall_length6.438 INCHES NOMINAL IN
aperture_length5.890 INCHES NOMINAL IN
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
cross-sectional_thickness0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BC715 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-235-6294
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46000018-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC715 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 1.245 INCHES NOMINAL IN
•
APERTURE LENGTH: 5.890 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC715 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH6.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.062 INCHES NOMINAL IN
APERTURE WIDTH1.245 INCHES NOMINAL IN
APERTURE LENGTH5.890 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
HOLE DIAMETER0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
70009PC5Reference document
Same NSN cross-reference
Reference document — Secondary reference
50138-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 46000018-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46000018-1?
46000018-1 is a GASKET.
What parts can replace 46000018-1?
There are 2 known substitutes for 46000018-1: 70009PC5, 50138-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 46000018-1?
46000018-1 is cataloged in the U.S. Government catalog under NSN 5330-00-235-6294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46000018-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.