PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4600-7
4600-7 ✓ Verified by PartsTable
Lindy · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CRIMPING TOOL,TERMINAL,HAND is a Lindy industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, housing_bore_diameter: 4.252 INCHES MINIMUM AND 4.256 INCHES MAXIMUM IN, sealing_element_style: ANGULAR-OPPOSED, accommodated_shaft_diameter: 3.249 INCHES MINIMUM AND 3.251 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-115-1798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4600-7
NSN: 5305-00-115-1798
FSC: 5305
CAGE: 01359 — TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
housing_bore_diameter4.252 INCHES MINIMUM AND 4.256 INCHES MAXIMUM IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter3.249 INCHES MINIMUM AND 3.251 INCHES MAXIMUM IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5305-00-115-1798
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4600-7 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 24
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
FASTENER LENGTH: 0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH24
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
FASTENER LENGTH0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD LENGTH0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
HEAD STYLEHEADLESS (SETSCREW)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
46007Interchangeable
interchangeable cross-reference
interchangeable
6594Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
PR-9001 ITEM 86Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4600-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4600-7?
4600-7 is a CRIMPING TOOL,TERMINAL,HAND manufactured by Lindy.
What parts can replace 4600-7?
There are 4 known substitutes for 4600-7: 46007, 6594, 00044 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4600-7?
4600-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-115-1798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4600-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026