PartsTable
Technical Data Sheet
460-500 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRIPOD,ANTENNA is a the manufacturer industrial component. Key specifications include color: WHITE, material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -65.0 FAHRENHEIT AND 600.0 FAHRENHEIT DEGF, special_features: MATERIAL REINFORCED WITH FIBERGLASS, center_hole_diameter: 5.000 INCHES NOMINAL IN, housing_bore_diameter: 6.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-146-2156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
460-500
NSN: 5330-01-146-2156
FSC: 5330
CAGE: 14711 — RSA ENGINEERED PRODUCTS, LLC DBA RSA ENGINEERED PRODUCTS LLC (USA)
SPECIFICATIONS
colorWHITE
materialRUBBER CHLOROPRENE CLASS CR
temp_rating-65.0 FAHRENHEIT AND 600.0 FAHRENHEIT DEGF
special_featuresMATERIAL REINFORCED WITH FIBERGLASS
center_hole_diameter5.000 INCHES NOMINAL IN
housing_bore_diameter6.000 INCHES NOMINAL IN
cross-sectional_height0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
end_item_identificationAN/TPQ-48(V)2
accommodated_shaft_diameter4.995 INCHES MINIMUM AND 5.005 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyTRIPOD,ANTENNA
NSN5330-01-146-2156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 460-500 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 4.995 INCHES MINIMUM AND 5.005 INCHES MAXIMUM IN
HOUSING BORE DIAMETER: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER4.995 INCHES MINIMUM AND 5.005 INCHES MAXIMUM IN
HOUSING BORE DIAMETER6.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
ST7M258-500Interchangeable
interchangeable cross-reference
interchangeable
600-500Interchangeable
interchangeable cross-reference
interchangeable
PTB864-500-250Interchangeable
interchangeable cross-reference
interchangeable
4-60500Interchangeable
interchangeable cross-reference
interchangeable
458-50018-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 460-500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 460-500?
460-500 is a TRIPOD,ANTENNA.
What parts can replace 460-500?
There are 5 known substitutes for 460-500: ST7M258-500, 600-500, PTB864-500-250 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 460-500?
460-500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-146-2156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 460-500