PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 46-AH24-24-160IN SS
46-AH24-24-160IN SS ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_style: DOUBLE OVAL (SAE SPLIT TYPE FLANGE) SECOND END, flange_width: 3.750 INCHES NOMINAL SECOND END IN, thread_class: 2B FIRST END, flange_length: 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM SECOND END IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-383-2255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46-AH24-24-160IN SS
NSN: 4720-01-383-2255
FSC: 4720
CAGE: 60848 — ALLIED SYSTEMS COMPANY DBA ALLIED SYSTEMS CO (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_styleDOUBLE OVAL (SAE SPLIT TYPE FLANGE) SECOND END
flange_width3.750 INCHES NOMINAL SECOND END IN
thread_class2B FIRST END
flange_length3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM SECOND END IN
connection_typePLAIN FACE FLANGE SECOND END
inside_diameter1.500 INCHES NOMINAL IN
connection_stylePLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) SECOND END
flange_thickness0.620 INCHES NOMINAL SECOND END IN
outside_diameter2.100 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
NSN4720-01-383-2255
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 46-AH24-24-160IN SS · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND WEATHERPROOF
•
FLANGE LENGTH: 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM SECOND END IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
BOLT HOLE DIAMETER: 0.531 INCHES NOMINAL SECOND END IN
•
FLANGE THICKNESS: 0.620 INCHES NOMINAL SECOND END IN
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
END CONNECTION DESIGNSTRAIGHT FIRST END
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
FLANGE LENGTH3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM SECOND END IN
INSIDE SURFACE CONDITIONSMOOTH
BOLT HOLE DIAMETER0.531 INCHES NOMINAL SECOND END IN
FLANGE THICKNESS0.620 INCHES NOMINAL SECOND END IN
END CONNECTION DESIGNSTRAIGHT SECOND END
END FLANGE CONSTRUCTIONSOLID SECOND END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A-A-59158 TY4CL1STBInterchangeable
interchangeable cross-reference
interchangeable
3595-8Interchangeable
8TB (4x2TB) SATA-II 3.5" Hot-Swap StorCenter px12-350r
interchangeable
MIL-T-21309 TY4CL1STBInterchangeable
interchangeable cross-reference
interchangeable
234426Interchangeable
interchangeable cross-reference
interchangeable
F3010606-4-4-4C-9.00Interchangeable
interchangeable cross-reference
interchangeable
F77C0619-24-24-24C-160.00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46-AH24-24-160IN SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46-AH24-24-160IN SS?
46-AH24-24-160IN SS is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 46-AH24-24-160IN SS?
There are 8 known substitutes for 46-AH24-24-160IN SS: A-A-59158 TY4CL1STB, 3595-8, MIL-T-21309 TY4CL1STB and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 46-AH24-24-160IN SS?
46-AH24-24-160IN SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-383-2255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46-AH24-24-160IN SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026