PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 46-AA16-16-140IN SS
46-AA16-16-140IN SS ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.000 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-382-6579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46-AA16-16-140IN SS
NSN: 4720-01-382-6579
FSC: 4720
CAGE: 60848 — ALLIED SYSTEMS COMPANY DBA ALLIED SYSTEMS CO (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter1.000 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.500 INCHES NOMINAL IN
special_featuresINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_directionRIGHT-HAND FIRST END
features_providedNONSKIVE
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-382-6579
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 46-AA16-16-140IN SS · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UN FIRST END
•
SPECIFICATION/STANDARD DATA: SAE J517,100R12-81343 NATIONAL STD/SPEC
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
END FITTING COMPONENT AND MATERIAL: COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 12 FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUN FIRST END
SPECIFICATION/STANDARD DATASAE J517,100R12-81343 NATIONAL STD/SPEC
LAYER COMPOSITION AND LOCATION1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
END ITEM IDENTIFICATIONALLIED SYSTEMS CO. ELECTRIC/HYDRAULIC CRANE
END FITTING COMPONENT AND MATERIALCOMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH12 FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
NOMINAL THREAD SIZE1.312 INCHES FIRST END IN
SPECIAL FEATURESINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
A-A-59158Interchangeable
interchangeable cross-reference
interchangeable
A-A-59158 TY4CL1STBInterchangeable
interchangeable cross-reference
interchangeable
AS59158 TY4CL1STBInterchangeable
interchangeable cross-reference
interchangeable
35957Interchangeable
4TB (4x1TB) SATA-II 3.5" Hot-Swap StorCenter px12-350r
interchangeable
32540Interchangeable
interchangeable cross-reference
interchangeable
60144Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46-AA16-16-140IN SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46-AA16-16-140IN SS?
46-AA16-16-140IN SS is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 46-AA16-16-140IN SS?
There are 17 known substitutes for 46-AA16-16-140IN SS: A-A-59158, A-A-59158 TY4CL1STB, AS59158 TY4CL1STB and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 46-AA16-16-140IN SS?
46-AA16-16-140IN SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-382-6579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46-AA16-16-140IN SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026