PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 46-99-102-12
46-99-102-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, height: 1.750 INCHES NOMINAL IN, diameter: 1.375 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: OFFSET, knob_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-480-4755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46-99-102-12
NSN: 5340-00-480-4755
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
height1.750 INCHES NOMINAL IN
diameter1.375 INCHES NOMINAL IN
materialSTEEL OVERALL
pawl_typeOFFSET
knob_length0.500 INCHES NOMINAL IN
style_designatorKNURLED
surface_treatmentZINC OVERALL
operational_directionRIGHT-HAND
pawl_actuation_methodKNOB
mounting_hole_diameter0.193 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes1.250 INCHES NOMINAL IN
NSN5340-00-480-4755
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46-99-102-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END: 1.000 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
WIDTH: 0.875 INCHES NOMINAL IN
•
HEIGHT: 1.750 INCHES NOMINAL IN
•
DIAMETER: 1.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: KNURLED
TECHNICAL CHARACTERISTICS (FLIS)
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END1.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES1.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
WIDTH0.875 INCHES NOMINAL IN
HEIGHT1.750 INCHES NOMINAL IN
DIAMETER1.375 INCHES NOMINAL IN
STYLE DESIGNATORKNURLED
PAWL TYPEOFFSET
KNOB LENGTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AN901-5AInterchangeable
interchangeable cross-reference
interchangeable
AN901Interchangeable
interchangeable cross-reference
interchangeable
3175-2-5DInterchangeable
interchangeable cross-reference
interchangeable
7J6547Interchangeable
interchangeable cross-reference
interchangeable
407130Interchangeable
interchangeable cross-reference
interchangeable
47-115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46-99-102-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46-99-102-12?
46-99-102-12 is a FASTENER,PAWL.
What parts can replace 46-99-102-12?
There are 10 known substitutes for 46-99-102-12: AN901-5A, AN901, 3175-2-5D and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 46-99-102-12?
46-99-102-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-480-4755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46-99-102-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026