PartsTable
Technical Data Sheet
PartsTable / MRO / 45P
45P ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_width: 0.875 INCHES NOMINAL IN, body_height: 0.875 INCHES NOMINAL IN, body_length: 3.000 INCHES NOMINAL IN, body_diameter: 1.031 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 45P
NSN: 3110-00-109-1375
FSC: 3110
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width0.875 INCHES NOMINAL IN
body_height0.875 INCHES NOMINAL IN
body_length3.000 INCHES NOMINAL IN
body_diameter1.031 INCHES MAXIMUM IN
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width25.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
terminal_length0.750 INCHES NOMINAL IN
special_featuresPAIR OF BEARINGS
NSN3110-00-109-1375
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 45P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
BEARING PRELOAD DESIGNATION: LIGHT
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH25.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
BEARING PRELOAD DESIGNATIONLIGHT
SPECIAL FEATURESPAIR OF BEARINGS
SURFACE FINISHGROUND
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
989084-3CInterchangeable
interchangeable cross-reference
interchangeable
16065Interchangeable
interchangeable cross-reference
interchangeable
VE16065Interchangeable
interchangeable cross-reference
interchangeable
LS5322Interchangeable
interchangeable cross-reference
interchangeable
HA27407-7075T6Interchangeable
interchangeable cross-reference
interchangeable
27407Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45P?
45P is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 45P?
There are 25 known substitutes for 45P: 989084-3C, 16065, VE16065 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45P?
45P is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026