PartsTable
Technical Data Sheet
Download PDF

45D89 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45D89: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6262 OVERALL, thread_class: 2B ROD CONNECTION, tongue_width: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_length: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM ROD CONNECTION IN, thread_direction: RIGHT-HAND ROD CONNECTION, tongue_thickness: 0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-861-2109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45D89
NSN: 5340-00-861-2109
FSC: 5340 — Hardware, Commercial
CAGE: 72914 — GRIMES AEROSPACE COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6262 OVERALL
thread_class2B ROD CONNECTION
tongue_width0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_length0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM ROD CONNECTION IN
thread_directionRIGHT-HAND ROD CONNECTION
tongue_thickness0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES ROD CONNECTION IN
shank_outside_diameter0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
thread_series_designatorUNF ROD CONNECTION
rod_connection_bore_depth0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
rod_connection_bore_diameter0.127 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
distance_from_end_to_hole_center3.807 INCHES MINIMUM AND 3.817 INCHES MAXIMUM IN
NSN5340-00-861-2109
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45D89 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
TONGUE WIDTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/10,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.190 INCHES ROD CONNECTION IN
•
SHANK OUTSIDE DIAMETER: 0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
DISTANCE FROM END TO HOLE CENTER: 3.807 INCHES MINIMUM AND 3.817 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
TONGUE WIDTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD LENGTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/10,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SHANK OUTSIDE DIAMETER0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
DISTANCE FROM END TO HOLE CENTER3.807 INCHES MINIMUM AND 3.817 INCHES MAXIMUM IN
ROD CONNECTION BORE DIAMETER0.127 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
THREAD CLASS2B ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45D89?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45D89?
45D89 is a CONNECTOR,ROD END.
What is the NSN for 45D89?
45D89 is cataloged in the U.S. Government catalog under NSN 5340-00-861-2109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45D89

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.