PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 45D5H27
45D5H27 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-079-7239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45D5H27
NSN: 5340-00-079-7239
FSC: 5340
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter1.688 INCHES NOMINAL IN
cushioning_environmental_protectionCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.530 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.312 INCHES NOMINAL IN
NSN5340-00-079-7239
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45D5H27 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.312 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 BAND
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
•
LOOP INSIDE DIAMETER: 1.688 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.204 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.312 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 BAND
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
LOOP INSIDE DIAMETER1.688 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
46727Upgraded Successor
successor cross-reference
successor
PFR95 MASKUpgraded Successor
successor cross-reference
successor
UN46727Upgraded Successor
successor cross-reference
successor
10843-153Upgraded Successor
successor cross-reference
successor
10015622-012Interchangeable
interchangeable cross-reference
interchangeable
5546898-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45D5H27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45D5H27?
45D5H27 is a CLAMP,LOOP.
What parts can replace 45D5H27?
There are 9 known substitutes for 45D5H27: 46727, PFR95 MASK, UN46727 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45D5H27?
45D5H27 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-079-7239. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45D5H27

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026