PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 45D5H10
45D5H10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-990-2092, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45D5H10
NSN: 5340-00-990-2092
FSC: 5340
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
cushioning_environmental_protectionCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classificationAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.998 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.780 INCHES NOMINAL IN
NSN5340-00-990-2092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45D5H10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.998 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHION
•
SURFACE TREATMENT: PASSIVATE BAND
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.998 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALRUBBER SILICONE CLASS Q CUSHION
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL COMP 321 BAND
DIAMETER0.204 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
TFIM25.0217-094Interchangeable
interchangeable cross-reference
interchangeable
241Interchangeable
interchangeable cross-reference
interchangeable
3701-0098Interchangeable
interchangeable cross-reference
interchangeable
10117579Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45D5H10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45D5H10?
45D5H10 is a CLAMP,LOOP.
What parts can replace 45D5H10?
There are 4 known substitutes for 45D5H10: TFIM25.0217-094, 241, 3701-0098 and 1 more. Substitute compatibility should be verified for your specific system.
Is 45D5H10 still available?
45D5H10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45D5H10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026