PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 45C817-001
45C817-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-435-8589, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45C817-001
NSN: 5340-00-435-8589
FSC: 5340
CAGE: 04660 — AIL SYSTEMS INC SUB OF EATON CORP (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.032 INCHES NOMINAL IN
mounting_hole_size0.144 INCHES NOMINAL IN
inside_diameter/arch_length0.219 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.125 INCHES NOMINAL IN
NSN5340-00-435-8589
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45C817-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
CUSHION: NOT INCLUDED
•
MOUNTING PAD: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
SURFACE TREATMENTZINC
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
CUSHIONNOT INCLUDED
OVERALL LENGTH0.625 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.125 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.144 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
51797AXInterchangeable
interchangeable cross-reference
interchangeable
C35405X10X6Interchangeable
interchangeable cross-reference
interchangeable
G274120-1Interchangeable
interchangeable cross-reference
interchangeable
139144Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45C817-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45C817-001?
45C817-001 is a STRAP,RETAINING.
What parts can replace 45C817-001?
There are 4 known substitutes for 45C817-001: 51797AX, C35405X10X6, G274120-1 and 1 more. Substitute compatibility should be verified for your specific system.
Is 45C817-001 still available?
45C817-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45C817-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026