PartsTable
Technical Data Sheet
Download PDF

45C510 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45C510: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5052, heat_treatment: T-3 SOLUTION HEAT TREATED, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, first_leg_length: 0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-515-0754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45C510
NSN: 5340-00-515-0754
FSC: 5340 — Hardware, Commercial
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5052
heat_treatmentT-3 SOLUTION HEAT TREATED
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
first_leg_length0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
surface_treatmentCHROMATE
first_leg_thickness0.051 INCHES NOMINAL IN
NSN5340-00-515-0754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45C510 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.335 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.164 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.237 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.335 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.164 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.237 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
SECOND LEG LENGTH0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 45C510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45C510?
45C510 is a BRACKET,ANGLE.
What is the NSN for 45C510?
45C510 is cataloged in the U.S. Government catalog under NSN 5340-00-515-0754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45C510

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.