PartsTable
Technical Data Sheet
Download PDF

459655C1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

459655C1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.71 INCHES NOMINAL IN, overall_length: 3.34 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-589-3007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
459655C1
NSN: 5340-01-589-3007
FSC: 5340 — Hardware, Commercial
CAGE: 03KT1 — ANIXTER (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.71 INCHES NOMINAL IN
overall_length3.34 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.50 INCHES NOMINAL IN
loop_inside_diameter2.125 INCHES NOMINAL IN
end_item_identificationMRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS
distance_from_loop_center_to_tongue_end2.11 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP, RUBBER CUSHIONED: 2-1/8 IN. CLAMP DIA AND .281 INCH MTG HOLE IN
center_to_center_distance_between_loop_and_mounting_hole1.80 INCHES NOMINAL IN
NSN5340-01-589-3007
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 459655C1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.50 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.11 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.281 INCHES NOMINAL IN
OVERALL LENGTH3.34 INCHES NOMINAL IN
OVERALL WIDTH0.71 INCHES NOMINAL IN
MATERIAL THICKNESS0.50 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.11 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP, RUBBER CUSHIONED: 2-1/8 IN. CLAMP DIA AND .281 INCH MTG HOLE IN
END ITEM IDENTIFICATIONMRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.80 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
501491C1Reference document
Same NSN cross-reference
Reference document — Secondary reference
AM-72901Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 459655C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 459655C1?
459655C1 is a CLAMP,LOOP.
What parts can replace 459655C1?
There are 2 known substitutes for 459655C1: 501491C1, AM-72901. Substitute compatibility should be verified for your specific system.
What is the NSN for 459655C1?
459655C1 is cataloged in the U.S. Government catalog under NSN 5340-01-589-3007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 459655C1