PartsTable
Technical Data Sheet
Download PDF

45945K32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45945K32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL AND STEEL COMP 316 SCREW, special_features: SMOOTH BAND WITH ROLLED EDGES FOR SOFT HOSE AND TUBE WORM DRIVE, special_test_features: TIGHTEN WITH A 9/32 INCH (7MM) HEX NUT DRIVER MM, end_item_identification: MISC HULL SYSTEM, part_name_assigned_by_controlling_agency: HOSE AND TUBE CLAMP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-572-4982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45945K32
NSN: 5340-01-572-4982
FSC: 5340 — Hardware, Commercial
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL AND STEEL COMP 316 SCREW
special_featuresSMOOTH BAND WITH ROLLED EDGES FOR SOFT HOSE AND TUBE WORM DRIVE
special_test_featuresTIGHTEN WITH A 9/32 INCH (7MM) HEX NUT DRIVER MM
end_item_identificationMISC HULL SYSTEM
part_name_assigned_by_controlling_agencyHOSE AND TUBE CLAMP
NSN5340-01-572-4982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45945K32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIAL TEST FEATURES: TIGHTEN WITH A 9/32 INCH (7MM) HEX NUT DRIVER MM
•
MATERIAL: STEEL AND STEEL COMP 316 BAND
TECHNICAL CHARACTERISTICS
SPECIAL TEST FEATURESTIGHTEN WITH A 9/32 INCH (7MM) HEX NUT DRIVER MM
SPECIAL FEATURESSMOOTH BAND WITH ROLLED EDGES FOR SOFT HOSE AND TUBE WORM DRIVE
PART NAME ASSIGNED BY CONTROLLING AGENCYHOSE AND TUBE CLAMP
END ITEM IDENTIFICATIONMISC HULL SYSTEM
MATERIALSTEEL AND STEEL COMP 316 BAND
MATERIALSTEEL AND STEEL COMP 316 BOLT
MATERIALSTEEL AND STEEL COMP 316 SCREW
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 45945K32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45945K32?
45945K32 is a CLAMP,LOOP.
What is the NSN for 45945K32?
45945K32 is cataloged in the U.S. Government catalog under NSN 5340-01-572-4982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45945K32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.