PartsTable
Technical Data Sheet
Download PDF

458336 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

458336: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.165 INCHES MINIMUM AND 0.169 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN, aperture_width: 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, overall_length: 1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN, aperture_length: 0.902 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN, cross-sectional_thickness: 0.280 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-431-7041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
458336
NSN: 5330-00-431-7041
FSC: 5330 — Packing and Gasket Materials
CAGE: F0057 — THALES SIX GTS FRANCE SAS (FRA)
SPECIFICATIONS
hole_diameter0.165 INCHES MINIMUM AND 0.169 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
aperture_width0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
overall_length1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
aperture_length0.902 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN
cross-sectional_thickness0.280 INCHES NOMINAL IN
outside_corner_bevel_length_along_width0.120 INCHES NOMINAL IN
outside_corner_bevel_length_along_length0.120 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.355 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.325 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.212 INCHES MINIMUM AND 1.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-431-7041
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 458336 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.280 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.120 INCHES NOMINAL IN
•
APERTURE LENGTH: 0.902 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.120 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.280 INCHES NOMINAL IN
OVERALL LENGTH1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
OVERALL WIDTH1.922 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN
APERTURE WIDTH0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.120 INCHES NOMINAL IN
APERTURE LENGTH0.902 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.120 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.212 INCHES MINIMUM AND 1.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.325 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 458336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 458336?
458336 is a GASKET.
What is the NSN for 458336?
458336 is cataloged in the U.S. Government catalog under NSN 5330-00-431-7041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 458336

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.