PartsTable
Technical Data Sheet
4582-2 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Colour code your network!<br>- Full CAT6 specification with moulded boots<br>- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal<br>- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2<br>- Gigabit Ethernet ready<br>- 100% performance tested<br>- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable<br>- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.<br>- Useful for colour coding your departments, workgroups, etc. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-482-1596, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
4582-2
NSN: 5331-00-482-1596
FSC: 5331 — O-RING
CAGE: 19139 — EASTMAN KODAK CO (USA)
SPECIFICATIONS
colorWHITE SINGLE ACTUATOR
shapeROUND
materialTITANIUM OVERALL
body_stylePANEL MOUNTED
body_width0.750 INCHES NOMINAL IN
lens_colorRED
body_height0.750 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
overall_width0.750 INCHES NOMINAL IN
actuator_styleRECTANGULAR
actuator_width0.620 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
NSN5331-00-482-1596
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4582-2 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER
CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CENTER HOLE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
5253-635Interchangeable
interchangeable cross-reference
interchangeable
276Interchangeable
interchangeable cross-reference
interchangeable
AS568B-008Interchangeable
interchangeable cross-reference
interchangeable
VV119Interchangeable
interchangeable cross-reference
interchangeable
81635Interchangeable
interchangeable cross-reference
interchangeable
19-8-3236Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4582-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4582-2?
4582-2 is a BOLT,TIBIAL,ORTHOPEDIC manufactured by Lindy.
What parts can replace 4582-2?
There are 32 known substitutes for 4582-2: 5253-635, 276, AS568B-008 and 29 more. Substitute compatibility should be verified for your specific system.
Is 4582-2 still available?
4582-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4582-2