PartsTable
Technical Data Sheet
Download PDF

458096 — SHAFT,STRAIGHT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

458096: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, end_similarity: NOT IDENTICAL, overall_length: 13.312 INCHES NOMINAL IN, first_end_style: PLAIN, second_end_style: FLAT KEYWAY, special_features: BOTH ENDS CHAMFERED 0.031 IN. BY 45 DEG; 0.641 IN.

MIN,0.656 IN. MAX LG OVER-KNURL LOCATED 0.500 IN. FROM FIRST END IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-521-4349, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
458096
NSN: 5340-00-521-4349
NIINs: 005214349, 009983731
FSC: 5340 — Hardware, Commercial
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
end_similarityNOT IDENTICAL
overall_length13.312 INCHES NOMINAL IN
first_end_stylePLAIN
second_end_styleFLAT KEYWAY
special_featuresBOTH ENDS CHAMFERED 0.031 IN. BY 45 DEG; 0.641 IN. MIN,0.656 IN. MAX LG OVER-KNURL LOCATED 0.500 IN. FROM FIRST END IN
first_end_diameter0.3750 INCHES NOMINAL IN
second_end_diameter0.3750 INCHES NOMINAL IN
external_keyway_length0.437 INCHES NOMINAL SECOND END IN
second_end_keyway_depth0.138 INCHES NOMINAL IN
second_end_keyway_width0.1250 INCHES NOMINAL IN
NSN5340-00-521-4349
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 458096 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.875 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.500 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.406 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.875 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.500 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
N2458Reference document
Same NSN cross-reference
Reference document — Secondary reference
45135AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 458096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 458096?
458096 is a SHAFT,STRAIGHT.
What parts can replace 458096?
There are 2 known substitutes for 458096: N2458, 45135A. Substitute compatibility should be verified for your specific system.
What is the NSN for 458096?
458096 is cataloged in the U.S. Government catalog under NSN 5340-00-521-4349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 458096