PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 458-017-001
458-017-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,CASEMENT is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, length: 1.750 INCHES NOMINAL IN, material: STEEL OVERALL, strike_style: SURFACE, special_features: ADJUSTABLE PAWL 1/8 IN. TO 3/8 IN.GRIP; IN, style_designator: TEE.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-522-2369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
458-017-001
NSN: 5340-00-522-2369
FSC: 5340
CAGE: 07421 — L3HARRIS INTERSTATE ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
length1.750 INCHES NOMINAL IN
materialSTEEL OVERALL
strike_styleSURFACE
special_featuresADJUSTABLE PAWL 1/8 IN. TO 3/8 IN.GRIP; IN
style_designatorTEE
surface_treatmentCADMIUM OVERALL
NSN5340-00-522-2369
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 458-017-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: TEE
•
LENGTH: 1.750 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
WIDTH: 0.875 INCHES NOMINAL IN
•
STRIKE STYLE: SURFACE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORTEE
LENGTH1.750 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
WIDTH0.875 INCHES NOMINAL IN
SPECIAL FEATURESADJUSTABLE PAWL 1/8 IN. TO 3/8 IN.GRIP; IN
STRIKE STYLESURFACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
208Interchangeable
interchangeable cross-reference
interchangeable
13340Interchangeable
interchangeable cross-reference
interchangeable
503-S 40Interchangeable
interchangeable cross-reference
interchangeable
38TB10Interchangeable
interchangeable cross-reference
interchangeable
601-GP-10-NHInterchangeable
interchangeable cross-reference
interchangeable
157B2179 PIECEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 458-017-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 458-017-001?
458-017-001 is a FASTENER,CASEMENT.
What parts can replace 458-017-001?
There are 17 known substitutes for 458-017-001: 208, 13340, 503-S 40 and 14 more. Substitute compatibility should be verified for your specific system.
Is 458-017-001 still available?
458-017-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 458-017-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026