PartsTable
Technical Data Sheet
Download PDF

457-60-32 — MICROCIRCUIT,LINEAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

457-60-32: MICROCIRCUIT,LINEAR.

The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_height: 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, outside_diameter: 2.547 INCHES MINIMUM AND 2.599 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND ADJUSTABLE, inclosure_material: METAL, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-297-5362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
457-60-32
NSN: 5331-00-297-5362
NIINs: 002975362, 008746017
FSC: 5331 — O-ring
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_height0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
outside_diameter2.547 INCHES MINIMUM AND 2.599 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED AND ADJUSTABLE
inclosure_materialMETAL
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
center_hole_diameter2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
body_outside_diameter0.355 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
input_circuit_pattern3 INPUT
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
inclosure_configurationCAN
NSN5331-00-297-5362
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 457-60-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.547 INCHES MINIMUM AND 2.599 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.547 INCHES MINIMUM AND 2.599 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
10V60-141-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3-932 N865-65Reference document
Same NSN cross-reference
Reference document — Secondary reference
60-P-31-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N602-70-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-01-457-60-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
725-70-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 457-60-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 457-60-32?
457-60-32 is a MICROCIRCUIT,LINEAR.
What parts can replace 457-60-32?
There are 10 known substitutes for 457-60-32: 10V60-141-32, 3-932 N865-65, 60-P-31-32 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 457-60-32?
457-60-32 is cataloged in the U.S. Government catalog under NSN 5331-00-297-5362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 457-60-32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.