PartsTable
Technical Data Sheet
Download PDF

457-60-010 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

457-60-010: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, outside_diameter: 0.379 INCHES NOMINAL IN, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-004-3096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
457-60-010
NSN: 5331-00-004-3096
FSC: 5331 — O-ring
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
outside_diameter0.379 INCHES NOMINAL IN
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
elongation_percentage200 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-004-3096
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 457-60-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.379 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.379 INCHES NOMINAL IN
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 5
MS29513-010Reference document
Same NSN cross-reference
Reference document — Secondary reference
SB9133 PIECE 15Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10134661Reference document
Same NSN cross-reference
Reference document — Informative reference only
GHN10095-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5331PL0143680Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 457-60-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 457-60-010?
457-60-010 is a O-RING.
What parts can replace 457-60-010?
There are 5 known substitutes for 457-60-010: MS29513-010, SB9133 PIECE 15, 10134661 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 457-60-010?
457-60-010 is cataloged in the U.S. Government catalog under NSN 5331-00-004-3096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 457-60-010