PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4564132
4564132 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 1.943 INCHES NOMINAL IN, center_hole_diameter: 1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING, cross_section_outside_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-225-5237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4564132
NSN: 5330-01-225-5237
FSC: 5330
CAGE: 54716 — HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter1.943 INCHES NOMINAL IN
center_hole_diameter1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-01-225-5237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4564132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
PERIPHERAL DIAMETER: 1.943 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER1.943 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEO-RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
ARP568-132Interchangeable
interchangeable cross-reference
interchangeable
5331PL1371930Interchangeable
interchangeable cross-reference
interchangeable
ARP568-132IDSA9250Interchangeable
interchangeable cross-reference
interchangeable
PA658Interchangeable
interchangeable cross-reference
interchangeable
AF132Interchangeable
interchangeable cross-reference
interchangeable
FA7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4564132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4564132?
4564132 is a PACKING,PREFORMED.
What parts can replace 4564132?
There are 8 known substitutes for 4564132: ARP568-132, 5331PL1371930, ARP568-132IDSA9250 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4564132?
4564132 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-225-5237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4564132

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026