PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4562-120-EL
4562-120-EL ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.099 INCHES MINIMUM AND 1.101 INCHES MAXIMUM IN, center_hole_diameter: 1.013 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, supplementary_features: JOINT QUANTITY 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-096-8829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4562-120-EL
NSN: 5330-01-096-8829
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.099 INCHES MINIMUM AND 1.101 INCHES MAXIMUM IN
center_hole_diameter1.013 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
supplementary_featuresJOINT QUANTITY 1
cross-sectional_shape_styleSQUARE/RECTANGULAR
criticality_code_justificationZZZY
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-096-8829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4562-120-EL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
SUPPLEMENTARY FEATURES: JOINT QUANTITY 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CENTER HOLE DIAMETER: 1.013 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUPPLEMENTARY FEATURESJOINT QUANTITY 1
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
CENTER HOLE DIAMETER1.013 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.099 INCHES MINIMUM AND 1.101 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
4562-120-ELInterchangeable
interchangeable cross-reference
interchangeable
002120ELInterchangeable
interchangeable cross-reference
interchangeable
002120Interchangeable
interchangeable cross-reference
interchangeable
002120CPInterchangeable
Same NIIN cross-reference
interchangeable
4562120, ELInterchangeable
Same NIIN cross-reference
interchangeable
PL-1054 PART 002120CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4562-120-EL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4562-120-EL?
4562-120-EL is a RETAINER,PACKING.
What parts can replace 4562-120-EL?
There are 8 known substitutes for 4562-120-EL: 4562-120-EL, 002120EL, 002120 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4562-120-EL?
4562-120-EL is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-096-8829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4562-120-EL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026