PartsTable
Technical Data Sheet
455489 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

DISPOSAL CONTAINER,HYPODERMIC NE. Key specifications include material: PLASTIC, POLYETHYLENE (PP) OUTER CONTAINER, capacity_rating: 6.9 QUARTS NOMINAL, part_name_assigned_by_controlling_agency: SHARPS CONTAINER 6.9 QT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-8906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455489
NSN: 5330-00-904-8906
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP) OUTER CONTAINER
capacity_rating6.9 QUARTS NOMINAL
special_featuresRED,TRANSLUCENT; PUNCTURE RESISTANT; MEDIUM SZ; ONE-WAY VALVE OPENING; VENTED LID; STERILIZATION UP TO 270 DEG F.; INFECT. WASTE INDICATOR DEGF
part_name_assigned_by_controlling_agencySHARPS CONTAINER 6.9 QT
NSN5330-00-904-8906
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455489 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 8.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 10.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
SEALING ELEMENT STYLE: ANGULAR
CASE STYLE: SQUARE
MATERIAL: STEEL CASE
SEAL WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER8.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER10.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
554895Interchangeable
interchangeable cross-reference
interchangeable
244-287Interchangeable
interchangeable cross-reference
interchangeable
5489Interchangeable
interchangeable cross-reference
interchangeable
305489Interchangeable
interchangeable cross-reference
interchangeable
18Z728Interchangeable
Same NIIN cross-reference
interchangeable
00044 TY 1 CASE TY 2B ELEMENTInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 455489?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455489?
455489 is a DISPOSAL CONTAINER,HYPODERMIC NE.
What parts can replace 455489?
There are 7 known substitutes for 455489: 554895, 244-287, 5489 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 455489?
455489 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-8906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455489