PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 4552-00
4552-00 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, alignment_type: RIGIDRIGID, overall_height: 0.3564 INCHES NOMINAL0.3564 INCHES NOMINAL IN, surface_finish: UNGROUNDUNGROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-384-2629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 4552-00
NSN: 7025-01-384-2629
FSC: 7025
CAGE: 64959 — AMERICAN TELEPHONE AND TELEGRAPH CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
alignment_typeRIGIDRIGID
overall_height0.3564 INCHES NOMINAL0.3564 INCHES NOMINAL IN
surface_finishUNGROUNDUNGROUND
style_designatorGROOVED RACE SURFACE, BANDED ODGROOVED RACE SURFACE, BANDED OD
housing_bore_diameter5.500 INCHES NOMINAL IN
largest_bore_diameter0.4375 INCHES NOMINAL0.4375 INCHES NOMINAL IN
sealing_element_styleVERTICAL
bore_smallest_diameter0.4620 INCHES NOMINAL0.4620 INCHES NOMINAL IN
end_item_identificationPROJECT ASH
NSN7025-01-384-2629
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 4552-00 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 4552-00 MFR OEM
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONPROJECT ASH
END ITEM IDENTIFICATIONPROJECT ASH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
455200Interchangeable
interchangeable cross-reference
interchangeable
55200SInterchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
602-1/2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 4552-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4552-00?
4552-00 is a PRINTER,AUTOMATIC DATA PROCESSIN. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 4552-00?
There are 4 known substitutes for 4552-00: 455200, 55200S, 00044 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4552-00?
4552-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-384-2629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4552-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026