PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 45517-14
45517-14 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: CHAMFERED, pin_overall_length: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.1250 INCHES NOMINAL IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.010 INCHES NOMINAL IN, material_document_and_classification: QQ-T-580,GR C FED SPEC ALL MATERIAL RESPONSES OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-050-5483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45517-14
NSN: 5315-00-050-5483
FSC: 5315
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W114 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W214 OR STEEL COMP W310 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationQQ-T-580,GR C FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-050-5483
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 45517-14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-T-580,GR C FED SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W114 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W214 OR STEEL COMP W310 OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-T-580,GR C FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W114 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W214 OR STEEL COMP W310 OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
150 25Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCInterchangeable
interchangeable cross-reference
interchangeable
200125Interchangeable
interchangeable cross-reference
interchangeable
200125FInterchangeable
interchangeable cross-reference
interchangeable
21827Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45517-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45517-14?
45517-14 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 45517-14?
There are 9 known substitutes for 45517-14: 150 25, 1340, GGG-D-751 TYC and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45517-14?
45517-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-050-5483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45517-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026