PartsTable
Technical Data Sheet
Download PDF

4551344HAR — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4551344HAR: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q SEALING ELEMENT, seal_width: 0.468 INCHES NOMINAL IN, construction: ONE-PIECE, housing_bore_diameter: 4.999 INCHES NOMINAL IN, accommodated_shaft_diameter: 5.005 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-001-4985, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4551344HAR
NSN: 5330-00-001-4985
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q SEALING ELEMENT
seal_width0.468 INCHES NOMINAL IN
constructionONE-PIECE
housing_bore_diameter4.999 INCHES NOMINAL IN
accommodated_shaft_diameter5.005 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-001-4985
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4551344HAR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.468 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 5.005 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q SEALING ELEMENT
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.468 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER5.005 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q SEALING ELEMENT
MATERIALSTEEL CORROSION RESISTING SPRING
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-001-9852 5330-00-003-9246 5330-00-004-1681 5330-00-004-3196 5330-00-004-3450 5330-00-004-3451 5330-00-004-4245 5330-00-004-5072
SUBSTITUTES & CROSS-REFERENCES 2
317749C92Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4551344Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4551344HAR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4551344HAR?
4551344HAR is a SEAL,PLAIN.
What parts can replace 4551344HAR?
There are 2 known substitutes for 4551344HAR: 317749C92, 4551344. Substitute compatibility should be verified for your specific system.
What is the NSN for 4551344HAR?
4551344HAR is cataloged in the U.S. Government catalog under NSN 5330-00-001-4985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4551344HAR