PartsTable
Technical Data Sheet
Download PDF

455084 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

455084: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC, color_coding: BLACK, capacity_rating: 9.000 MILLILITERS NOMINAL, special_features: PULL CAP COLOR IS GREEN, features_provided: COVER, primary_container_type: PACKAGE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-531-5996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455084
NSN: 5330-00-531-5996
NIINs: 005315996, 015892198
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialPLASTIC
color_codingBLACK
capacity_rating9.000 MILLILITERS NOMINAL
special_featuresPULL CAP COLOR IS GREEN
features_providedCOVER
primary_container_typePACKAGE
primary_container_unit_quantity50
part_name_assigned_by_controlling_agency16 X 100MM SERUM TUBE WITH CLOT ACTIVATOR, PULL CAP MM
NSN5330-00-531-5996
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455084 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 8.498 INCHES MINIMUM AND 8.502 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 7.000 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER8.498 INCHES MINIMUM AND 8.502 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER7.000 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 5
49880Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
47755Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
32166Reference document
Same NSN cross-reference
Reference document — Secondary reference
55084Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 455084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455084?
455084 is a SEAL,PLAIN ENCASED.
What parts can replace 455084?
There are 5 known substitutes for 455084: 49880, 00044, 47755 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 455084?
455084 is cataloged in the U.S. Government catalog under NSN 5330-00-531-5996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455084