PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 455034K69
455034K69 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, housing_bore_diameter: 4.999 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-0972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455034K69
NSN: 5330-00-641-0972
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
housing_bore_diameter4.999 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter3.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-641-0972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455034K69 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 3.938 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER3.938 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
CASE STYLESQUARE
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
3424-8821-0000Interchangeable
interchangeable cross-reference
interchangeable
4379-2Interchangeable
interchangeable cross-reference
interchangeable
RE61A222TYPE61158Interchangeable
interchangeable cross-reference
interchangeable
334Interchangeable
interchangeable cross-reference
interchangeable
61158Interchangeable
interchangeable cross-reference
interchangeable
39-280Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 455034K69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455034K69?
455034K69 is a SEAL,PLAIN ENCASED.
What parts can replace 455034K69?
There are 29 known substitutes for 455034K69: 3424-8821-0000, 4379-2, RE61A222TYPE61158 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 455034K69?
455034K69 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-0972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455034K69

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026