PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 455014
455014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, temp_rating: -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 4.254 INCHES NOMINAL IN, housing_bore_diameter: 4.249 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-928-2411, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455014
NSN: 5330-00-928-2411
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
temp_rating-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter4.254 INCHES NOMINAL IN
housing_bore_diameter4.249 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-928-2411
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 4.249 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
TEMP RATING: -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
OUTSIDE DIAMETER: 4.254 INCHES NOMINAL IN
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER4.249 INCHES NOMINAL IN
CASE STYLESQUARE
TEMP RATING-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER4.254 INCHES NOMINAL IN
SEAL WIDTH0.625 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
8701184-01Interchangeable
interchangeable cross-reference
interchangeable
11JC5224-184Interchangeable
interchangeable cross-reference
interchangeable
0125-SW1RSInterchangeable
interchangeable cross-reference
interchangeable
51363Interchangeable
interchangeable cross-reference
interchangeable
D422-0-B3Interchangeable
interchangeable cross-reference
interchangeable
33303Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 455014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455014?
455014 is a SEAL,PLAIN ENCASED.
What parts can replace 455014?
There are 13 known substitutes for 455014: 8701184-01, 11JC5224-184, 0125-SW1RS and 10 more. Substitute compatibility should be verified for your specific system.
Is 455014 still available?
455014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026