PartsTable
Technical Data Sheet
Download PDF

455006 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

455006: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include special_features: CAP IS THREADED AND USED ON A S/S ELBOW THAT IS USED ON A SHUT-OFF VALVEON THE KMAC-5 AIR CONTROL SYSTEM, end_item_identification: AIR CONTROL SYSTEM PANEL KMAC-5, part_name_assigned_by_controlling_agency: CAP-PLUG PROTECTIVE,DUST AND MOISTURE SEAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-431-1068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455006
NSN: 5330-00-431-1068
NIINs: 004311068, 013601128, 017007542
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
special_featuresCAP IS THREADED AND USED ON A S/S ELBOW THAT IS USED ON A SHUT-OFF VALVEON THE KMAC-5 AIR CONTROL SYSTEM
end_item_identificationAIR CONTROL SYSTEM PANEL KMAC-5
part_name_assigned_by_controlling_agencyCAP-PLUG PROTECTIVE,DUST AND MOISTURE SEAL
NSN5330-00-431-1068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
SEAL WIDTH0.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.875 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
K0S155Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 455006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455006?
455006 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 455006?
There are 2 known substitutes for 455006: 00044, K0S155. Substitute compatibility should be verified for your specific system.
What is the NSN for 455006?
455006 is cataloged in the U.S. Government catalog under NSN 5330-00-431-1068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455006