PartsTable
Technical Data Sheet
Download PDF

45480-101 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45480-101: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.328 INCHES MINIMUM AND 0.368 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN, overall_length: 2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN, outside_corner_radius: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-447-4330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45480-101
NSN: 5330-00-447-4330
FSC: 5330 — Packing and Gasket Materials
CAGE: 66195 — SOLAR TURBINES INCORPORATED DBA SOLAR TURBINES INCORPORATED (USA)
SPECIFICATIONS
hole_diameter0.328 INCHES MINIMUM AND 0.368 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN
overall_length2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN
outside_corner_radius0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-447-4330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45480-101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.760 INCHES MINIMUM AND 2.880 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
HOLE DIAMETER0.328 INCHES MINIMUM AND 0.368 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 45480-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45480-101?
45480-101 is a GASKET.
What is the NSN for 45480-101?
45480-101 is cataloged in the U.S. Government catalog under NSN 5330-00-447-4330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45480-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.