PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 454548
454548 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 144.000 INCHES NOMINAL IN, special_features: PRESSURE SENSITIVE, cross-sectional_width: 0.156 INCHES NOMINAL IN, cross-sectional_height: 0.500 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-465-2638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
454548
NSN: 5330-00-465-2638
FSC: 5330
CAGE: 19139 — EASTMAN KODAK CO (USA)
SPECIFICATIONS
length144.000 INCHES NOMINAL IN
special_featuresPRESSURE SENSITIVE
cross-sectional_width0.156 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-465-2638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 454548 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
LENGTH: 144.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.156 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
LENGTH144.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESPRESSURE SENSITIVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
190164-5Interchangeable
interchangeable cross-reference
interchangeable
711625-46Interchangeable
interchangeable cross-reference
interchangeable
15377-3970DInterchangeable
interchangeable cross-reference
interchangeable
473063Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 454548?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 454548?
454548 is a RUBBER STRIP.
What parts can replace 454548?
There are 4 known substitutes for 454548: 190164-5, 711625-46, 15377-3970D and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 454548?
454548 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-465-2638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 454548

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026