PartsTable
Technical Data Sheet
Download PDF

4537-50-193-1N — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4537-50-193-1N: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.3850 INCHES NOMINAL IN, length: 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.1250 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), style_designator: SINGLE GRIP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-393-4926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4537-50-193-1N
NSN: 5340-01-393-4926
FSC: 5340 — Hardware, Commercial
CAGE: 86928 — SEASTROM MANUFACTURING CO INC (USA)
SPECIFICATIONS
width0.3850 INCHES NOMINAL IN
length1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN
materialCOPPER ALLOY OVERALL
hole_diameter0.1250 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM IN
hole_quantity2
mounting_methodUNTHREADED HOLE(S)
style_designatorSINGLE GRIP
surface_treatmentNICKEL OVERALL
material_thickness0.0400 INCHES NOMINAL IN
loop/holding_dimension0.4850 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
NSN5340-01-393-4926
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4537-50-193-1N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: SINGLE GRIP
•
LOOP/HOLDING DIMENSION: 0.4850 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0400 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
WIDTH: 0.3850 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
LENGTH1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORSINGLE GRIP
LOOP/HOLDING DIMENSION0.4850 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0400 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
WIDTH0.3850 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
HOLE QUANTITY2
HOLE DIAMETER0.1250 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4537-50-193-1N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4537-50-193-1N?
4537-50-193-1N is a CLIP,SPRING TENSION.
What is the NSN for 4537-50-193-1N?
4537-50-193-1N is cataloged in the U.S. Government catalog under NSN 5340-01-393-4926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4537-50-193-1N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.