PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 453613
453613 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, shank_length: 0.540 INCHES NOMINAL IN, overall_length: 2.120 INCHES NOMINAL IN, shank_diameter: 0.372 INCHES NOMINAL IN, first_end_style: CHAMFERED, second_end_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-012-0456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
453613
NSN: 5315-00-012-0456
FSC: 5315
CAGE: 19139 — EASTMAN KODAK CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
shank_length0.540 INCHES NOMINAL IN
overall_length2.120 INCHES NOMINAL IN
shank_diameter0.372 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleSQUARE
special_featuresSMALLER DIA SHANK DRILLED AND TAPPED LONGITUDINAL 10-32 UNF-3B THD
style_designatorSHOULDER
shoulder_diameter0.625 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
second_shank_length0.295 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-012-0456
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 453613 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND SHANK LENGTH: 0.295 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND SHANK LENGTH0.295 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
OVERALL LENGTH2.120 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
SHOULDER DIAMETER0.625 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SHANK DIAMETER0.372 INCHES NOMINAL IN
SPECIAL FEATURESSMALLER DIA SHANK DRILLED AND TAPPED LONGITUDINAL 10-32 UNF-3B THD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
453613Interchangeable
interchangeable cross-reference
interchangeable
14BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 453613?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 453613?
453613 is a PIN,SHOULDER,HEADLESS.
What parts can replace 453613?
There are 2 known substitutes for 453613: 453613, 14B. Substitute compatibility should be verified for your specific system.
What is the NSN for 453613?
453613 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-012-0456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 453613

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026