PartsTable
Technical Data Sheet
453394 ✓ Verified by PartsTable
Intellinet · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Impedance Matched<br>Wire and connectors are carefully matched to virtually eliminate echoing and cancellation, guaranteeing high-speed, error-free transmission.<br>- Gold-Plated Contacts<br>Gold plating eliminates corrosion and provides maximum conductivity to ensure data integrity.<br>- Unique PVC Jacket<br>Exclusive polymer technology provides unsurpassed durability and flexibility.<br>- Snag-Free Boots<br>Prevent cable kinks and bent pins when removing them from patch panels.<br>- Strain Relief<br>Increases strength while sustaining maximum flexibility even under extreme conditions.<br>- Standards Tested<br>Meets or exceeds current Cat5e proposed standards. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3394, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
453394
NSN: 3110-00-227-3394
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.2910 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
style_designatorSTEEP ANGLE
cone_corner_radius0.0310 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-227-3394
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 453394 · Intellinet ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
CONE WIDTH: 1.2910 INCHES NOMINAL IN
MATERIAL: STEEL OVERALL
STYLE DESIGNATOR: STEEP ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8750 INCHES NOMINAL IN
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE WIDTH1.2910 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTEEP ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
72188Interchangeable
interchangeable cross-reference
interchangeable
A72188Interchangeable
interchangeable cross-reference
interchangeable
L-2191Interchangeable
interchangeable cross-reference
interchangeable
22617Interchangeable
interchangeable cross-reference
interchangeable
125002Interchangeable
interchangeable cross-reference
interchangeable
33-179Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 453394?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 453394?
453394 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Intellinet.
What parts can replace 453394?
There are 11 known substitutes for 453394: 72188, A72188, L-2191 and 8 more. Substitute compatibility should be verified for your specific system.
Is 453394 still available?
453394 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 453394