PartsTable
Technical Data Sheet
Download PDF

45332 — HANDLE,ELECTRIC SOLDERING IRON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

45332: HANDLE,ELECTRIC SOLDERING IRON.

The HANDLE,ELECTRIC SOLDERING IRON is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 6.500 INCHES NOMINAL IN, end_type: W/ATTACHMENT LOCATION NOT OTHERWISE SPECIFIED, material: STEEL HOOK, seat_angle: 12.0 DEGREES FIRST END, thread_class: 2B FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-187-3635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 45332
NSN: 5330-00-187-3635
NIINs: 001873635, 002292772, 005400707, 006316821, 010518322, 012883573, 013866067
FSC: 5330 — Packing and Gasket Materials
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length6.500 INCHES NOMINAL IN
end_typeW/ATTACHMENT LOCATION NOT OTHERWISE SPECIFIED
materialSTEEL HOOK
seat_angle12.0 DEGREES FIRST END
thread_class2B FIRST END
fastener_typeHOOK LOCATION NOT OTHERWISE SPECIFIED
hook_quantity1
opening_width0.750 INCHES NOMINAL IN
overall_width1.498 INCHES MAXIMUM IN
head_thickness0.781 INCHES NOMINAL IN
overall_length2.046 INCHES NOMINAL IN
NSN5330-00-187-3635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
1281-3018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2900-103ALTCPC19Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
253070R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
JP2001-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
641727Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 45332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45332?
45332 is a HANDLE,ELECTRIC SOLDERING IRON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 45332?
There are 10 known substitutes for 45332: 1281-3018, 2900-103ALTCPC19, AN6227-11 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45332?
45332 is cataloged in the U.S. Government catalog under NSN 5330-00-187-3635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45332