PartsTable
Technical Data Sheet
Download PDF

45290-45220CLASS3 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

45290-45220CLASS3: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.9370 INCHES NOMINAL IN, cone_width: 1.2188 INCHES NOMINAL IN, bore_diameter: 2.2500 INCHES MINIMUM AND 2.2505 INCHES MAXIMUM IN, overall_width: 1.1875 INCHES NOMINAL IN, standout_width: 0.2500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-932-5330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45290-45220CLASS3
NSN: 3110-00-932-5330
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.9370 INCHES NOMINAL IN
cone_width1.2188 INCHES NOMINAL IN
bore_diameter2.2500 INCHES MINIMUM AND 2.2505 INCHES MAXIMUM IN
overall_width1.1875 INCHES NOMINAL IN
standout_width0.2500 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0930 INCHES NOMINAL IN
lubrication_materialLUBRICANT
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.1250 INCHES MINIMUM AND 4.1251 INCHES MAXIMUM IN
retainer_fabrication_methodSTAMPED
NSN3110-00-932-5330
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 45290-45220CLASS3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
LUBRICATION MATERIAL: LUBRICANT
•
CUP WIDTH: 0.9370 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 4.1250 INCHES MINIMUM AND 4.1251 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODSTAMPED
LUBRICATION MATERIALLUBRICANT
CUP WIDTH0.9370 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.1250 INCHES MINIMUM AND 4.1251 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.0930 INCHES NOMINAL IN
STANDOUT WIDTH0.2500 INCHES NOMINAL IN
CONE WIDTH1.2188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
2523796Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45290-45220CLASS3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45290-45220CLASS3?
45290-45220CLASS3 is a BEARING,ROLLER,TAPERED.
What parts can replace 45290-45220CLASS3?
There is 1 known substitute for 45290-45220CLASS3: 2523796. Substitute compatibility should be verified for your specific system.
What is the NSN for 45290-45220CLASS3?
45290-45220CLASS3 is cataloged in the U.S. Government catalog under NSN 3110-00-932-5330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45290-45220CLASS3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.