PartsTable
Technical Data Sheet
Download PDF

452336K69 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

452336K69: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN, housing_bore_diameter: 1.830 INCHES MINIMUM AND 1.834 INCHES MAXIMUM IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-084-7529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
452336K69
NSN: 5330-00-084-7529
FSC: 5330 — Packing and Gasket Materials
CAGE: 81596 — FEDERAL-MOGUL CORP SEALING PRODUCTS GROUP VAN WERT PLANT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
housing_bore_diameter1.830 INCHES MINIMUM AND 1.834 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2300 FEET PER MINUTE FT
NSN5330-00-084-7529
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 452336K69 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 1.830 INCHES MINIMUM AND 1.834 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2300 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER1.830 INCHES MINIMUM AND 1.834 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2300 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
482336SKReference document
Same NSN cross-reference
Reference document — Secondary reference
160BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 452336K69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 452336K69?
452336K69 is a SEAL,PLAIN ENCASED.
What parts can replace 452336K69?
There are 2 known substitutes for 452336K69: 482336SK, 160B. Substitute compatibility should be verified for your specific system.
What is the NSN for 452336K69?
452336K69 is cataloged in the U.S. Government catalog under NSN 5330-00-084-7529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 452336K69