PartsTable
Technical Data Sheet
Download PDF

45229-53 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45229-53: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, center_hole_diameter: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-292-0580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45229-53
NSN: 5331-00-292-0580
FSC: 5331 — O-ring
CAGE: D2638 — EME ELEKTRO-METALL EXPORT GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
center_hole_diameter0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-292-0580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45229-53 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
1820-0100Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-006-4067-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10740Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7377-006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X00443Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-006Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 45229-53?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45229-53?
45229-53 is a O-RING.
What parts can replace 45229-53?
There are 9 known substitutes for 45229-53: 1820-0100, PRP568-006-4067-70, 10740 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45229-53?
45229-53 is cataloged in the U.S. Government catalog under NSN 5331-00-292-0580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45229-53