4521-100-187-2C — CLIP,SPRING TENSION

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

4521-100-187-2C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN, length: 1.070 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, overall_height: 1.230 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-464-2970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

4521-100-187-2C

NSN: 5340-01-464-2970
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

width	1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
length	1.070 INCHES NOMINAL IN
material	STEEL OVERALL
hole_diameter	0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
hole_quantity	3
overall_height	1.230 INCHES NOMINAL IN
mounting_method	UNTHREADED HOLE(S)
style_designator	STANDOFF
material_thickness	0.032 INCHES NOMINAL IN
loop/holding_dimension	0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
distance_from_loop_center_to_end	0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
NSN	5340-01-464-2970

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 1.070 INCHES NOMINAL IN

•

MOUNTING METHOD: UNTHREADED HOLE(S)

•

STYLE DESIGNATOR: STANDOFF

•

LOOP/HOLDING DIMENSION: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO END: 0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN

•

WIDTH: 1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.230 INCHES NOMINAL IN
LENGTH	1.070 INCHES NOMINAL IN
MOUNTING METHOD	UNTHREADED HOLE(S)
STYLE DESIGNATOR	STANDOFF
LOOP/HOLDING DIMENSION	0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END	0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
WIDTH	1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
MATERIAL	STEEL OVERALL
HOLE QUANTITY	3

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

4521-100-187-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

4521-100-187-002Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 4521-100-187-2C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4521-100-187-2C?

4521-100-187-2C is a CLIP,SPRING TENSION.

What parts can replace 4521-100-187-2C?

There are 2 known substitutes for 4521-100-187-2C: 4521-100-187-2, 4521-100-187-002. Substitute compatibility should be verified for your specific system.

What is the NSN for 4521-100-187-2C?

4521-100-187-2C is cataloged in the U.S. Government catalog under NSN 5340-01-464-2970. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4521-100-187-2C — CLIP,SPRING TENSION

Request a Quote — 4521-100-187-2C