451515: BEARING,BALL,ANNULAR.
The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, flange_width: 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN, bore_diameter: 5.9049 INCHES MINIMUM AND 5.9053 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES NOMINAL, overall_width: 1.3730 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-466-2763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL BALL |
| bore_shape | STRAIGHT |
| flange_width | 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN |
| bore_diameter | 5.9049 INCHES MINIMUM AND 5.9053 INCHES MAXIMUM IN |
| contact_angle | 25.0 DEGREES NOMINAL |
| overall_width | 1.3730 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN |
| load_direction | RADIAL |
| surface_finish | GROUND |
| style_designator | NON-LOADING GROOVE, NON-SEPARABLE |
| internal_clearance | 0.0036 INCHES MINIMUM RADIAL AND 0.0058 INCHES MAXIMUM RADIAL IN |
| flange_outside_diameter | 9.1200 INCHES MINIMUM AND 9.1400 INCHES MAXIMUM IN |
| outer_ring_outside_diameter | 8.8578 INCHES MINIMUM AND 8.8583 INCHES MAXIMUM IN |
| NSN | 5330-00-466-2763 |
| CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL IN |
| HARDNESS RATING | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL |
| STYLE DESIGNATOR | CIRCULAR |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| OUTSIDE DIAMETER | 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN |
| APERTURE DIAMETER | 1.031 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN |
| MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL |
No substitute or cross-reference records for this part.