PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 450AMM316
450AMM316 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.828 INCHES NOMINAL IN, surface_treatment: ZINC CASE, housing_bore_diameter: 4.501 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-6116, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
450AMM316
NSN: 5330-00-285-6116
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.828 INCHES NOMINAL IN
surface_treatmentZINC CASE
housing_bore_diameter4.501 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter3.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-285-6116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 450AMM316 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.828 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SURFACE TREATMENT: ZINC CASE
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.828 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
SURFACE TREATMENTZINC CASE
CASE STYLESQUARE
HOUSING BORE DIAMETER4.501 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
AOLA-C2D-A20Interchangeable
interchangeable cross-reference
interchangeable
831-15Interchangeable
interchangeable cross-reference
interchangeable
425-9Interchangeable
interchangeable cross-reference
interchangeable
400WOGInterchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
12Z9010-85Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 450AMM316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450AMM316?
450AMM316 is a SEAL,PLAIN ENCASED.
What parts can replace 450AMM316?
There are 7 known substitutes for 450AMM316: AOLA-C2D-A20, 831-15, 425-9 and 4 more. Substitute compatibility should be verified for your specific system.
Is 450AMM316 still available?
450AMM316 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450AMM316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026