PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 450604
450604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, features_provided: HERMETICALLY SEALED AND PROGRAMMED, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC, inclosure_material: CERAMIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
450604
NSN: 5330-00-154-7560
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED AND PROGRAMMED
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC
housing_bore_diameter2.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
inclosure_configurationDUAL-IN-LINE
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-7560
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 450604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
SEAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
50604Interchangeable
interchangeable cross-reference
interchangeable
17216Interchangeable
interchangeable cross-reference
interchangeable
160135-1Interchangeable
interchangeable cross-reference
interchangeable
11380Interchangeable
interchangeable cross-reference
interchangeable
2012-T 54Interchangeable
interchangeable cross-reference
interchangeable
44124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 450604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450604?
450604 is a MICROCIRCUIT,DIGITAL.
What parts can replace 450604?
There are 22 known substitutes for 450604: 50604, 17216, 160135-1 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 450604?
450604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026