PartsTable
Technical Data Sheet

4506-9/16 — REAMER,MACHINE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4506-9/16: REAMER,MACHINE.

The REAMER,MACHINE is a the manufacturer industrial component. Key specifications include diameter: 0.562 INCHES NOMINAL IN, shank_type: MORSE TAPER, reamer_type: JOBBERS, flute_design: STRAIGHT, flute_length: 3.250 INCHES NOMINAL IN, overall_length: 6.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-767-7870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4506-9/16
NSN: 5340-00-767-7870
NIINs: 007677870, 013352424
FSC: 5340 — Hardware, Commercial
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
diameter0.562 INCHES NOMINAL IN
shank_typeMORSE TAPER
reamer_typeJOBBERS
flute_designSTRAIGHT
flute_length3.250 INCHES NOMINAL IN
flute_quantity8
overall_length6.750 INCHES NOMINAL IN
shank_taper_number1
NSN5340-00-767-7870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4506-9/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT W/OPEN CENTER
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.750 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: THREADED FASTENER
•
PERIPHERAL SHAPE STYLE: ROUND, ONE HOLE
•
MATERIAL: STEEL
•
HOLE DIAMETER: 0.687 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.750 INCHES NOMINAL IN
SECURING DEVICE TYPETHREADED FASTENER
PERIPHERAL SHAPE STYLEROUND, ONE HOLE
MATERIALSTEEL
HOLE DIAMETER0.687 INCHES NOMINAL IN
BODY THICKNESS0.187 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
104785Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4506-9/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4506-9/16?
4506-9/16 is a REAMER,MACHINE.
What parts can replace 4506-9/16?
There is 1 known substitute for 4506-9/16: 104785. Substitute compatibility should be verified for your specific system.
What is the NSN for 4506-9/16?
4506-9/16 is cataloged in the U.S. Government catalog under NSN 5340-00-767-7870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4506-9/16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.